产品 / 紧固件 / 镀锌水泥螺栓 / ETA 1级认证,双头螺杆

镀锌水泥螺栓. ETA 1级认证,双头螺杆

评估与认证

钻头直径 × 长度最大固定厚度 [mm]痕迹编号最小销售单位彩盒件数外箱件数Technical Info.
Ø6 x 100 (M8)365050800
  • tfix - 最大夹具厚度36
  • SW-安装关键5
  • df - Ø 元件固定9
  • Tins - 扭矩 (Nm)10
  • hnom - 最小锚固深度55
  • h1 - 钻孔最小深度60
  • d0 - Ø 钻头6
  • hmin - Min. substrate thickness100
  • L- 长度100
Ø6 x 120 (M8)565050600
  • tfix - 最大夹具厚度56
  • SW-安装关键5
  • df - Ø 元件固定9
  • Tins - 扭矩 (Nm)10
  • hnom - 最小锚固深度55
  • h1 - 钻孔最小深度60
  • d0 - Ø 钻头6
  • hmin - Min. substrate thickness100
  • L- 长度120
Ø8 x 110 (M10)367050400
  • tfix - 最大夹具厚度36
  • SW-安装关键7
  • df - Ø 元件固定12
  • Tins - 扭矩 (Nm)20
  • hnom - 最小锚固深度65
  • h1 - 钻孔最小深度75
  • d0 - Ø 钻头8
  • hmin - Min. substrate thickness100
  • L- 长度110
Ø8 x 130 (M10)567050400
  • tfix - 最大夹具厚度56
  • SW-安装关键7
  • df - Ø 元件固定12
  • Tins - 扭矩 (Nm)20
  • hnom - 最小锚固深度65
  • h1 - 钻孔最小深度75
  • d0 - Ø 钻头8
  • hmin - Min. substrate thickness100
  • L- 长度130
Ø10 x 120 (M12)258025200
  • tfix - 最大夹具厚度25
  • SW-安装关键8
  • df - Ø 元件固定14
  • Tins - 扭矩 (Nm)30
  • hnom - 最小锚固深度75
  • h1 - 钻孔最小深度95
  • d0 - Ø 钻头10
  • hmin - Min. substrate thickness120
  • L- 长度120
Ø10 x 140 (M12)458025200
  • tfix - 最大夹具厚度45
  • SW-安装关键8
  • df - Ø 元件固定14
  • Tins - 扭矩 (Nm)30
  • hnom - 最小锚固深度75
  • h1 - 钻孔最小深度95
  • d0 - Ø 钻头10
  • hmin - Min. substrate thickness120
  • L- 长度140
  • [PATENTED DOUBLE THREAD] A stud for direct fixing in concrete, designed to provide strong and secure anchors in both cracked and non-cracked concrete. Its design features a patented double thread, designed to embed deeply into the concrete and ensure maximum load-bearing capacity.
  • [HIGH LOADS] This is the ideal anchor for structural fixings in concrete, such as stands, handrails, glazing, windows, shop windows, machinery and all types of high-load fixings where a concrete-specific fixing is required.
  • [REMOVABLE AND EASY TO INSTALL] It is a fully removable anchor, ideal for temporary installations or where the surface needs to be left completely clean after removal. It is also easy to install as it requires only a drill and an impact driver; no torque wrenches are needed.
  • [GALVANISED STEEL] It is made from stamped carbon steel, a highly resistant material with a zinc surface coating that prevents corrosion and rust. The tip has undergone a hardening process to ensure greater hardness, durability and ease of installation.
  • [APPROVED] It holds ETA approval for use in concrete, as well as seismic and fire resistance approvals, and VdS CEA 4001 certification, which confirms its suitability for the installation of sprinkler systems.
  • Structural applications
  • Temporary awnings or signage
  • Stadium seating
  • Wood to concrete structures
  • Railings and fencing
  • Shelving and racks
  • Structural beams and pillars
260490

有关产品

我们能为您提供哪些帮助?

如果您有任何疑问或需要更多信息,请使用此表格写信给我们:

宁波隆德五金制造有限公司告知,在本网站上自愿提供的个人数据将被处理并纳入相应的文件,由宁波隆德五金制造有限公司负责,尽管根据具体情况,其目的可能是以下任何一种:关注您提出的请求、投诉或问题,维护已建立的关系,全面和商业客户管理,会计和账单或发送通信,包括电子媒体、新闻和与宁波隆德五金制造有限公司有关的活动。

我们文件中的数据将严格保密,应受到最严格的保密处理,并应遵守2016年《通用数据保护条例》(GDPR)的所有要求。

根据数据保护法,强烈建议您不要发送高级别的个人数据,例如与健康有关的数据,因为这些数据没有编码或加密。如果发送这些详细信息,则由您自行承担责任。

根据《2016 年通用数据保护条例》(GDPR)的规定,用户可在任何时候行使其访问、更正、取消和反对的权利,只需将一封信连同您的身份证复印件寄至:宁波隆德五金制造有限公司,中国-浙江省宁波市慈溪市杭州湾新区海滨一路,邮编:315336。
更多信息
TFS

TFS

ETA 1级认证,双头螺杆